Skip to product information
ISA 828 MkII
1/6

Overview

Product description from Focusrite

Sharing the simple mic preamp design of the original Focusrite ISA 110 module from the Focusrite Studio Console, ISA 828 MK2 incorporates eight of Focusrite's classic mic preamps, with Lundahl LL1538 transformers on every input. Each channel has the option of mic or line inputs, while inputs 1-4 also feature instrument inputs on the front panel. Each mic pre has variable input impedance, to provide a range of subtly different sonic options when using microphones, including an 'ISA 110' setting, which replicates the impedance of the original Focusrite mic pre Up to 60dB of gain is available, with a further +20dB of continuously variable trim, providing a huge 80dB gain range. The high-pass filter with fixed 75Hz frequency and 18dB/octave roll-off. ISA 828 MK2 features high-pass filters, calibratable per-channel, six-segment LED meters, and switchable rear-panel insert points, which allow the use of inline processors such as compressors or EQs. Dedicated connectors for mic and line-level inputs allow all sources to be connected simultaneously, making ISA 828 MK2 perfect for permanent installation in a rack. New to the ISA 828 MK2 is an updated power supply that allows for more efficient power consumption, a reduction in heat generation, and extremely reliable operation. The optional ISA ADN8 analogue-to-digital expansion card provides eight Dante, ADAT and AES3 outputs at rates of up to 24-bit/192kHz. Key Features Classic ISA mic preamp design featuring Lundahl LL1538 input transformer Switching power supply design allows for efficient and cool operation Front-panel instrument inputs to the first four channels offer two impedance options: High (2.4 MΩ) and Low (470 kΩ) Line inputs with dedicated input connectors and front-panel switch Switchable input impedance including classic ISA 110 setting High-pass filters Switchable insert points when used with A-D card Calibratable, per-channel six-segment LED peak-level meters Optional A-D card with up to 192kHz, 24-bit sampling offers high-quality, precision digital audio conversion to Dante, ADAT and AES3 (sold separately)

Highlights

  • Classic ISA mic preamp design featuring Lundahl LL1538 input transformer
  • Switching power supply design allows for efficient and cool operation
  • Front-panel instrument inputs to the first four channels offer two impedance options: High (2.4 MΩ) and Low (470 kΩ)
  • Line inputs with dedicated input connectors and front-panel switch
  • Switchable input impedance including classic ISA 110 setting
  • Switchable insert points when used with A-D card
  • Calibratable, per-channel six-segment LED peak-level meters
  • Optional A-D card with up to 192kHz, 24-bit sampling offers high-quality, precision digital audio conversion to Dante, ADAT and AES3 (sold separately)
  • Classic ISA mic preamp design featuring Lundahl LL1538 input transformer
  • Switching power supply design allows for efficient and cool operation
  • Front-panel instrument inputs to the first four channels offer two impedance options: High (2.4 MΩ) and Low (470 kΩ)
  • Line inputs with dedicated input connectors and front-panel switch

Key specs

Compatible card
ISA ADN8
Channel count
2 Channels In
Instrument inputs
4 x 1/4" jack inputs
Input
8 x 1/4" jack inputs
All specifications

Full specifications

Gain Range 0dB to +30dB (30-60 switch disabled) and +30dB to +60dB (30-60 switch enabled) in 10dB steps, with an additional +20dB of continuous trim
Input Impedance Low = 600Ω, ISA 110 = 1400Ω, Med (Medium) = 2400Ω, High = 6800Ω
Max. Input Level +7dBu, min gain, medium Z
Frequency Response (20Hz - 20kHz) 20Hz - 20kHz ±0.2dB, min gain, medium Z
THD + N -91dB (0.0028%) @ -1dBr, min gain, medium Z
EIN -123dBu 'A'-Weighted (typical)
Signal-To-Noise Ratio 122dB 'A'-Weighted (typical), medium Z
Common-Mode Rejection Ratio 997Hz CMRR: -93dB, min gain, medium Z
Phantom Power +48V, independently switchable per channel
High-Pass Filter 75Hz knee frequency, 18dB/Octave, independently switchable per channel
Phase Inverts the phases of the selected input
Frequency Response (10Hz - 110kHz) 10Hz - 110kHz ±1.5dB, min gain, medium Z
Frequency Response (10Hz - 122kHz) 10Hz - 122kHz ±3dB, min gain, low Z
Channel Count 2 Channels In
Instrument Inputs 4 x 1/4" jack inputs
Mic Inputs Input: 8 x Female XLR
Input 8 x 1/4" jack inputs
Output 1 x DB-25 connectors (AES59)
Compatible Card ISA ADN8
Control Functions 16 x Pots (Gain and Trim). 60 Switches (On/Off Switch, 30-60 Gain, +48V, Phase, HPF, Insert, Z In, Input, Meters Pre A-D, Clock Select and Ext. Word Clock)

How buying works

How we work
  1. Ask for a price

    Use “Request price” or message us. We reply personally on WhatsApp, 10 am–7 pm IST, Mon–Sat.

  2. Get your quote

    Price and lead time confirmed on your quote. Pay online, by NEFT/RTGS, or raise a PO against it.

  3. Shipped with tracking

    Flat ₹379 shipping anywhere in India.

Questions about this product

Quick answers about the Focusrite ISA 828 MkII Audio Interface. Not covered here? We reply personally on WhatsApp, 10 am–7 pm IST, Mon–Sat.

What connections does the Focusrite ISA 828 MkII have?

The Focusrite ISA 828 MkII connects over Dante, TRS 6.35 mm and XLR.

Does the Focusrite ISA 828 MkII need phantom power?

The Focusrite ISA 828 MkII lists phantom power as +48V, independently switchable per channel.

How many channels does the Focusrite ISA 828 MkII have?

The Focusrite ISA 828 MkII has 2 channels.

What are the audio specifications of the Focusrite ISA 828 MkII?

The Focusrite ISA 828 MkII has a frequency response of 20Hz - 20kHz ±0.2dB, min gain, medium Z.

What is the part number for the Focusrite ISA 828 MkII?

The part number (model) of the Focusrite ISA 828 MkII is MOIF8282.

What is the Focusrite ISA 828 MkII compatible with?

The Focusrite ISA 828 MkII is compatible with ISA ADN8.

Focusrite ISA 828 MkII Audio Interface

Price on request