Tascam MM-4D/IN-E Audio Mixer

Additional Features

4 Mic/Line Input, 4 Dante Input/Output

Phantom Power and Remote Gain Control Compatible Mic Preamps

TASCAM Studio Quality Mic Preamps Installed

Compressor, 4 Band Parametric EQ, Auto Level, and More Effects Included

Built-In 8 in/4 Out Matrix Mixer

Input/Output Routing

PoE Supported

Remote Control via Control Software

Flexible Routing

Scene Preset

Installable According to Usage/Environment

Optional Rack Mount

The MM-4D/IN-E converts 4-channel mic/line input signals into 4-channel Dante output signals. It also supports 4-channel Dante input/output making it possible to use audio sources within an established Dante network.

The installed mic preamps support phantom power (+48V) and the input gain can be remote controlled via TASCAM DCP CONNECT software, via Dante or other external controllers.

The MM-4D/IN-E has installed two natural-sounding, high grade TASCAM mic preamps made with all the knowledge and experience cultivated through the years in the making of pro audio equipment. Input range covers from -70 dBu to +26 dBu, with equivalent input noise achieving less than -125 dB, and signal-noise ratio over 108 dB.

They can be finely adjusted depending on the mic/line equipment used.

Using the built-in matrix mixer, users can mix up to 8 different sources (4-channel mic/line inputs with 4-channel Dante inputs) and configure the settings on each of the four output zones. The matrix mixer is also equipped with a ducking function and an ambient noise compensator function, which detects the level of environmental sounds and automatically adjusts the input level of the source.

Flexible routing allows users to choose the output zone of 4 mic/line inputs or the built-in matrix mixer output zone as 4 Dante output. The MM-4D/IN-E can also be used as a simple mic/line input unit by bypassing the matrix mixer.

Power supply can be provided to the unit via PoE (Power over Ethernet).

No need for AC adaptors; power supply construction fees and installation costs can be reduced by using a PoE compatible network switch.

Controlling effects or the matrix mixer can be easily done through the dedicated control software; depending on the amount of controls the user needs, there are two types:

Routing to each Dante device is easy via Dante controller. Input/output units can be added flexibly to new or already established Dante systems.

Units can be easilly installed directly under desks or on walls with the included surface mount adaptors.

With the optional rack-mountable shelf AK-RS1, up to two Dante Compact Processor models can be installed in a 19 inch rack space.

Effect parameters, mix levels, input/output routings, etc. settings can be saved as up to 50 different presets by the scene preset function. This function allows switching different presets seamlessly in different environments.