Overview

Product description from Yamaha

Rack mount kit for EMX7/EMX5

Highlights

Rack mount kit for EMX7/EMX5

Key specs

Power: AC 100-240V, 50Hz/60Hz
Weight: 9.5 kg
Phantom power: +48 V
Load protection: DC-fault

All specifications

Manuals & downloads

Full specifications

Outline

I/O	TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
I/O	+48 V
I/O	SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
I/O	FOOT SWITCH : Effect Mute on/off
Bus	Stereo: 1, AUX: 2 (Including FX)
Input Channel Function	30 dB (CH1-4)
Input Channel Function	Supported (CH4)
Input Channel Function	80 Hz, -12 dB/oct. (CH1–3)
Input Channel Function	1-knob COMP (CH1–4)
Input Channel Function	10 kHz +15 dB / -15 dB (Shelving)
Input Channel Function	2.5 kHz +15 dB / -15 dB (Peaking)
Input Channel Function	100 Hz +15 dB / -15 dB (Shelving)
On-board processors	SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
On-board amplifiers	1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
On-board amplifiers	1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
Level Meter	2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)

General specifications

Frequency response	Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion	Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
Hum & noise level	-117 dBu (Noise is measured with A-weighting filter)
Hum & noise level	Input to SPEAKERS : -66 dBu (40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -80 dBu (20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Crosstalk	-85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit	DC-fault
Protection circuit	Over heat protection, Over current protection, Integral power protection
Protection circuit	Over heat protection, Over current protection
Power requirements	AC 100-240V, 50Hz/60Hz
Power consumption	45 W (Idle) / 250 W (1/8 Power)
Dimensions	465 mm (18 5/16")
Dimensions	308 mm (12 1/8")
Dimensions	325 mm (12 13/16")
Net weight	9.5 kg (20.9 lbs)
Accessories	Owner’s Manual, Technical Specifications, AC power cord (2.5 m)
Options	Foot switch: FC5, Rack-mount brackets: RK-EMX7
Others	Operating Temperature : 0 to +40℃

Manuals & downloads

Setups this belongs to

How buying works

How we work

Ask for a price

Use “Request price” or message us. We reply personally on WhatsApp, 10 am–7 pm IST, Mon–Sat.
Get your quote

Price and lead time confirmed on your quote. Pay online, by NEFT/RTGS, or raise a PO against it.
Shipped with tracking

Flat ₹379 shipping anywhere in India.

Questions about this product

Quick answers about the Yamaha RKEMX7 Rack mount kit. Not covered here? We reply personally on WhatsApp, 10 am–7 pm IST, Mon–Sat.

Ask on WhatsApp

What connections does the Yamaha RKEMX7 Rack mount kit have?

The Yamaha RKEMX7 Rack mount kit connects over XLR.

How much does the Yamaha RKEMX7 Rack mount kit weigh?

The Yamaha RKEMX7 Rack mount kit weighs 9.5 kg.

How is the Yamaha RKEMX7 Rack mount kit powered?

The Yamaha RKEMX7 Rack mount kit lists power supply protection as Over heat protection, Over current protection.

What is the part number for the Yamaha RKEMX7 Rack mount kit?

The part number (model) of the Yamaha RKEMX7 Rack mount kit is RKEMX7.

Is there a manual or datasheet for the Yamaha RKEMX7 Rack mount kit?

Yes. The documents for the Yamaha RKEMX7 Rack mount kit include EMX5 Owner's Manual; EMX7 Owner's Manual. They are linked in the Documents section of this page.