Skip to product information
Blackmagic 2110 IP Converter 3x3G
1/3

Blackmagic DesignModel W-CONIP-01

Blackmagic 2110 IP Converter 3x3G

₹74,316Incl. GST

Sourced to order · dispatched in 14–21 working days

WhatsApp

We reply personally on WhatsApp, 10 am–7 pm IST, Mon–Sat

IP standards IGMP v3
Video inputs 3
Ethernet USB-C for updates, configuration and control
Audio 16 channels embedded audio
Power 1 x Internal 100 - 240V AC 50/60Hz
Control RJ-45 10Gb/s Ethernet and USB-C

Full specifications

Overview

Product description from Blackmagic Design

The new Blackmagic 2110 IP Converter 3x3G lets you convert 3 separate 3G-SDI devices to 2110 IP video systems. That’s because its 10G Ethernet connection can handle 3 separate video channels at the same time. Plus each channel has independent SDI inputs and SDI outputs, so you could even connect to 6 completely different SDI devices! All 3G-SDI inputs feature loop outputs so you can install the converter in line within existing SDI systems. There’s also a reference output, timed to the 2110 PTP clock! Blackmagic 2110 IP Converter 3x3G includes an elegant front panel with a color LCD for monitoring, menus and diagnostics. You can even route IP inputs from the panel!

Key specs

IP standards
IGMP v3
Video inputs
3
Ethernet
USB-C for updates, configuration and control
Audio
16 channels embedded audio
Power
1 x Internal 100 - 240V AC 50/60Hz
Control
RJ-45 10Gb/s Ethernet and USB-C
All specifications

Compare with similar

All encoders and decoders

Compared on 6 key specs · swipe for more

Compare Blackmagic 2110 IP Converter 3x3G with similar encoders and decoders
This product Blackmagic 2110 IP Converter 3x3G
₹74,316Incl. GST
IP standardsIGMP v3SMPTE ST2110-20, SMPTE ST2110-21, SMPTE ST2110-30, SMPTE ST2110-40IGMP v3IGMP v3
Video inputs3—Not listed11
EthernetUSB-C for updates, configuration and control1 x USB-C 3.0 for configuration and firmware updates1 x 10Gb/s RJ-45 connector for SMPTE-2110 IP video in and out1 x USB-C 3.0 for configuration and firmware updates
Audio16 channels embedded audio16 Ch embedded audio on ST-2110 IP video via 10G Ethernet16 Ch embedded audio on SDI input16 Ch embedded audio on SDI input
Power1 x Internal 100 - 240V AC 50/60HzTBA18W18W
ControlRJ-45 10Gb/s Ethernet and USB-C—Not listed—Not listed—Not listed

Full specifications

Connections
SDI Inputs 3
SDI Loop Outputs 3
SDI Outputs 3
SDI Audio Inputs 16 channels embedded audio.
SMPTE 2110 Input / Output 10G Ethernet supports 3 x video input channels and 3 x video output channels each up to 1080p60 and up to 16 channels of embedded audio plus ancillary data.
10G Ethernet Port 1 x 10Gb/s PoE+ RJ‑45 connector supports 10/100/1000/10G BASE-T.
Reference Output Tri-Sync or Black Burst.
Computer Interface USB-C for updates, configuration and control.
Video Standards
HD Video Standards 720p50, 720p59.94, 720p60; 1080i50, 1080i59.94, 1080i60; 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SDI Compliance SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M, ITU-R BT.656, ITU-R BT.601.
SDI Metadata Support RP 188/SMPTE 12M-2 and closed captioning.
Audio Sampling Television standard sample rate of 48 kHz and 24 bit.
Color Precision 8, 10 RGB 4:4:4 in all modes up to 1080p30 and 8, 10-bit YUV 4:2:2 in all modes.
Color Space REC 709
IP Video Compliance
SMPTE 2110-20 (Uncompressed Video) IGMP v3
SMPTE 2110-21 (Traffic Shaping) Sender: Narrow; Receiver: Narrow, Wide Synchronous, Asynchronous
SMPTE 2110-30 (PCM) Audio Conformance level: Level C
SMPTE 2110-40 (Ancillary Data) Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata.
Precision Time Protocol IEEE 1588-2008 (PTP v2); ST 2059-1; ST 2059-2
NMOS IS-04 Discovery and Registration v1.3.2; Peer-to-peer via mDNS/DNS-SD
NMOS IS-05 Connection Management v1.1.2
NMOS BCP-002-01 Natural Grouping
NMOS BCP-004-01 Receiver capabilities
Control
Built in Control Panel 6 buttons with spin knob control and 2.2 inch color display for device control and menu settings.
External Control RJ-45 10Gb/s Ethernet and USB-C.
Other specifications
Operating Systems Mac 13.0 Ventura,; Mac 14.0 Sonoma or later.; Windows 10 and 11.
Power Requirements
Power Supply 1 x Internal 100 - 240V AC 50/60Hz.
Power Inputs 1 x IEC C14 socket for AC power.; 1 x RJ45 Ethernet connector for power from PoE+ power supplies.
Power Usage 20 W
Environmental Specifications
Operating Temperature 5° to 40 ° C (32° to 104° F)
Storage Temperature -20° to 60° C (-4° to 140° F)
Relative Humidity 0% to 90% non-condensing

How buying works

How we work
  1. Order online

    Pay at checkout (UPI, cards, net banking) or by NEFT/RTGS. Businesses can raise a PO against our quotation.

  2. We source it for you

    Sourced to order · dispatched in 14–21 working days

  3. Shipped with tracking

    Flat ₹379 shipping anywhere in India.

Questions about this product

Quick answers about the Blackmagic 2110 IP Converter 3x3G. Not covered here? We reply personally on WhatsApp, 10 am–7 pm IST, Mon–Sat.

What connections does the Blackmagic Design Blackmagic 2110 IP Converter 3x3G have?

The Blackmagic Design Blackmagic 2110 IP Converter 3x3G connects over SDI, Ethernet and USB-C.

How is the Blackmagic Design Blackmagic 2110 IP Converter 3x3G powered?

The Blackmagic Design Blackmagic 2110 IP Converter 3x3G lists power supply as 1 x Internal 100 - 240V AC 50/60Hz.

What is the part number for the Blackmagic Design Blackmagic 2110 IP Converter 3x3G?

The part number (model) of the Blackmagic Design Blackmagic 2110 IP Converter 3x3G is W-CONIP-01.

Is there a manual or datasheet for the Blackmagic Design Blackmagic 2110 IP Converter 3x3G?

Yes. The documents for the Blackmagic Design Blackmagic 2110 IP Converter 3x3G include Blackmagic 2110 IP Converter 3x3G - User Manual. They are linked in the Documents section of this page.

Blackmagic 2110 IP Converter 3x3G

₹74,316Incl. GST